Why ISO 14001 Standards Certification?

It’s always a good time to line up for a session with an ISO 14001 consultant. For most companies, this is really a good way of looking better. In reality though, certification can do so much more than polish company image. It is also the best way to make sure that a company has such strong values that its systems are structured in such a way as to limit negative environmental impact.
For a lot of businesses, general objectives revolve mainly around making more profits. These days though, it is hardly feasible or wise to maintain only this single-minded drive. Nearly every business, regardless of type or size can have an impact on the environment. Whatever you do can either worsen environmental degradation or help in preservation. It is now therefore, every business owner’s responsibility to strike a balance between making profits and promoting environmental responsibility.
This is where becoming ISO 14001 certified becomes important. To be exact, certification is a form of acknowledgement. Certified companies are recognized as holders and users of comprehensive environment management systems.
What the 14001 standards really seek to provide are generic standards. This can’t be helped. Specific points are difficult to come up with since businesses aren’t all the same. This isn’t exactly a negative aspect though. After all, there are many general terms and standards that are applicable and even necessary to companies that belong to different sectors.
Read more on ISO 14001 Standards at http://www.iso9001-standard.us

Introduction To ISO 14001 Standards

An environmental policy should reflect the vision, intentions, philosophy, values, and beliefs of the organization with respect to the environment. Top management should put a great deal of thought and imagination into developing and crafting the policy, since it will become the code of conduct by which the organization lives and operates. The policy should be practical and inspirational, providing a framework and a compass for business and technical decisions and actions, and at the same time motivate and encourage all personnel in the organization to achieve excellence in environmental performance.

The ISO 14001 Standard specifies several requirements for the development, content, intent, and implementation of an environmental policy:

1. Top management is responsible and accountable for defining the organization’s environmental policy. They must, as a minimum, carefully review, approve, and commit to abiding by an environmental policy that has been developed for their consideration.

2. The policy must completely cover the organization’s (i.e., facility’s) range of operations, including where appropriate, raw material acquisition, transportation, packaging, and shipping of product,as well as all on-site operations that may impact the environment.

3. The policy must contain three core commitments that are ISO 14001 absolute requirements:

(i) A commitment to continual improvement of the EMS and environmental performance.
(ii) A commitment to the prevention of pollution (i.e., this means taking all reasonable steps to eliminate, or at least minimize, pollution).
(iii) A commitment to comply with relevant environmental legislation and regulations, and with other requirements to which the organization subscribes. This means the organization commits to meet local, regional, and national legislated environmental standards.

4. The policy must give direction and a framework for progress through new environmental objectives and targets that will be set during the course of implementing and maintaining the EMS.

5. The policy must be documented, and it must be implemented through the day-to-day functioning of the EMS.

6. The policy must be maintained, meaning kept up to date and relevant to current operations and conditions.

7. The policy must be communicated to all employees. This implies active, intentional efforts by the organization, led by top management, to ensure all employees know about, understand, and apply the principles, ideas, and commitments in the policy.

8. The policy must be made available to the public, i.e., it must be accessible to all members of the public who wish to see it.

In addition to the essential requirements for an environmental policy, other considerations that may be incorporated into the policy include:

Principles of sustainable development, resource renewal, and preservation • of biological diversity

A commitment to use the most effective pollution abatement technology and • equipment, consistent with economic viability of the business (i.e., BEAT – Best Economically Achievable Technology)

Use of environmental performance indicators to quantitatively monitor • progress

Life cycle thinking – consideration of ‘cradle to grave’ impacts of a • product, which would require the organization to assess cumulative environmental impacts from all stages, from design of the product; acquisition of raw materials; processing to finished product; packaging; shipment; end-use; and ultimate re-use, recycle, or disposal.

For all components of this element of the Standard to be brought to fruition, it is essential that there is clear allocation of responsibilities for developing, approving, communicating, disseminating, implementing, maintaining, and when necessary, revising the environmental policy.

Although environmental policy is the first element of ISO 14001, it may be prudent for an organization to defer finalization of the wording of their policy until work has been done to identify the scope of environmental impacts from the operation, and other planning and preliminary preparation for the EMS has been done. This will help to ensure the policy is authentic and appropriate for the organization’s purpose.

Please visit http://www.e-wia.com for more information.

IS0 14001 – HISTORICAL DEVELOPMENT

Firstly ISO 14000 environment system standards was prepared in June of 1992 year in Rio at world apex and this standard brooks decisions of this world apex and Rio contract principles. After 1 year, ISO established one technique committee which is yielded by 50 different country representatives to prepare international environment management system in 1993 year. ISO 14001 environment management system standard was issued in September of 1996 year with works of this committee. ISO 14001 standard is used as voluntary now but ISO 14001 will be burden by coercions of societies, international organizations, states in the future. Levels which environment management system passed are the following briefly:
= Europe community countries issued I action plan in 1973 year (to practice protecting preventions of environment )= BS 7750 Standard in 1992= Rio Declaration in 1992 year= ISO/TC 207. Environmental management technique committee was established in 1993 year to develop ISO 14000 family standards= TS 9719 standard (environment management system – General features) in 1994 year= ISO 14001 standard in 1996 year= ISO 14001 current version in April of 2005 Nisan 2005

Five Steps to Implementing ISO 14001:2004

ISO 14001 provides a logical, common-sense approach for
businesses to adopt. To start it is recommended to carry out an
environmental review of the business and the Annex to the Standard
provides guidance on the approach required. The Standard then
requires a management system to be developed that addresses the
key environmental issues that were identified by the review as being
relevant to the business, through a rational programme of control and
continual improvement.
There are five key steps to ISO 14001 EMS implementation, and
subsequent operation which are clearly laid out in just three pages of
text.
The five key steps are:
1. Environmental Policy
2. Planning
3. Implementation and Operation
4. Checking and Corrective Action
5. Management Review
Step 1. Environmental Policy
The company or organisation must write an environmental policy
statement which is relevant to the business activities and approved by
top management. Their full commitment is essential if environmental
management is to work. The ISO 14001 Standard clearly sets out
what to cover in the policy. Often a one page document is sufficient.
Produce a first issue and expect to amend it several times before
assessment and registration as knowledge grows in the company.
Step 2. Planning
Plan what the EMS is to address.
Environmental aspects
First make lists of the environmental aspects (issues) that are relevant
to the business. The environmental review mentioned earlier should
provide most of this information and the Annex to ISO 14001 provides
guidance on the format for doing this.
Consider the inputs, outputs and processes/activities of the business in
relation to;
a) emissions to air
b) releases to water
c) waste management
d) contamination of land
e) use of raw materials and natural resources
f) other local environmental and community issues
Consider both site (direct) and offsite (ie. indirect) aspects that you
control or have influence over (such as suppliers) and in relation to
normal operations, shut-down and start-up conditions and reasonably
foreseeable and emergencies situations.
A simple written procedure is then required to determine which of the
aspects identified are really or probably significant (important) and
training needs, outline the key stages of the project and dates that will
lead to the target achievement).
Gradually apply environmental management programme thinking to
such things as the introduction of new products, new or improved
processes and other key activities of the business. In particular,
ensure existing projects become environmental management projects
where there is a significant environmental impact involved, so that the
EMS becomes company wide. This is a frequent oversight found
during ISO 14001 assessments. The EMS must cover the whole
business – like a net thrown over the whole business and for example
including such things as engineering and maintenance
Step 3. Implementation and Operation
Structure and responsibility
Appoint one or more people, depending on the size of the business, to
have authority and responsibility for implementing and maintaining the
EMS and provide sufficient resources. (It’s worth monitoring costs
carefully and benchmarking these against key consumption figures so
that improvements delivered by the EMS become apparent).
Training, awareness and competence
Implement a procedure to provide environmental training appropriate
to identified needs for management, the general workforce, project
teams and key plant operators. This can have far reaching benefits
on employee motivation. The workforce is usually very supportive of
moves to achieve genuine environmental improvement. Every
company has its share of cynics but even some of these can be won
over with time. Training will vary from a general briefing for the
workforce to detailed environmental auditor training.
Communication
Implement procedures to establish a system of internal and external
communication to receive environmental information and respond to it
and to circulate new information to people that need to know. This will
include: new legislation, information from suppliers, customers and
neighbours and communications both with employees and for
employees about progress with the EMS. This process can often
generate worthwhile ideas from employees themselves for future
environmental improvements.
Environmental management system documentation
The EMS itself needs to be documented with a manual, procedures
and work instructions but keep it brief and simple. The Standard
clearly states where procedures are required. Eleven system
procedures are required to maintain the EMS, plus operating work
instructions but if you already have ISO 9000, this will cover most of six
of the procedures required and a quality system can certainly be
expanded to cover ISO 14001 as well. Cross reference the EMS
manual to other environmental and quality documents to link the EMS
and to integrate it with existing business practices.
Operational control
Implement additional operating procedures (work instructions) to
control the identified significant (important) aspects of production
processes and other activities. Some of these will already exist but
may need a ‘bit of polish’. Don’t forget significant aspects that relate to
goods and services from suppliers and contractors.
Emergency preparedness and response
Implement procedures to address reasonably foreseeable
emergencies and to minimise their impact should they occur. (eg. Fire,
major spillages of hazardous materials, explosion risks etc.)
Step 4. Checking and Corrective Action
Monitoring and measurement
Implement procedures to monitor and measure the progress of
projects against the targets which have been set, the performance of
processes against the written criteria using calibrated equipment (verify
monitoring records) and regularly check (audit) the company’s
compliance with legislation that has been identified as relevant to your
business. The most effective way of doing this is through regular
progress meetings.
Nonconformance and corrective and preventive action
Implement procedures to enable appropriate corrective and
subsequent preventive action to be taken where breaches of the EMS
occur (eg. process control problems, delays in project process, noncompliance
with legislation, incidents etc.).
Records
Implement procedures to keep records generated by the
environmental management system. The Annex to the Standard
suggests those that are likely to be required.
Environmental management system audit
Implement a procedure to carry out audits of each part of the EMS and
company activities and operations to verify both compliance with the
EMS and with ISO 14001. Audit results must be reported to top
management . A typical audit cycle is one year but more critical
activities will require auditing more frequently.
Step 5. Management Review
At regular intervals (typically annual), top management must conduct
through meetings and record minutes of a review of the EMS, to
determine that it is still appropriate and effective or to make changes
where necessary. Top management will need to consider audit
results, project progress, changing circumstances and the requirement
of ISO 14001 for continual improvement, through setting and achieving
further environmental targets.